The Falcon DS1 — BeagleBone Blue Drone (Part 2)

Control Wiring

The BeagleBone uses mostly JST connectors. We need the following:

  • Four (4) of the 2-pin 1.5 JST ZH female connectors, with attached 150mm 28AWG wires, for the motors,
  • Eight (8) of the 4-pin 1.0 JST SH female connectors, with attached 150mm 28AWG wires, for the encoders as well as the UART, I2C, CAN, and PWR busses, and
  • Four (4) of the 6-pin 1.0 JST SH female connectors, with attached 150mm 28AWG wires, for the SPI, GPS, GPIO, and ADC busses.

--

--

Get the Medium app

A button that says 'Download on the App Store', and if clicked it will lead you to the iOS App store
A button that says 'Get it on, Google Play', and if clicked it will lead you to the Google Play store
David Such

David Such

Reefwing Software · Embedded Systems Engineer · iOS & Android Development · Robotics · Drones · Arduino · Raspberry Pi · Flight Control